The microphone has a frequency response range of 20Hz-20kHz, and testing confirmed this – the microphone was able to pick up very high and low frequency sounds – and a sensitivity of -34dB ±3dB.

ADJUSTABLE CLAMP】: Adjustable clamp to mount on the desktop easily, fixes securely to any mic stand for easy to install and convenient to use. Several posts ago I mentioned a plan to build an MS mic by following an Instructable written by Jules Ryckebusch.In case the inherent presence peak of the capsule turns out to be bothersome, the circuit and the board have the resistors in series with the output PNP bases, precisely to facilitate implementing Henry Spragen's solution for that.

If you’re looking to get started with something like a vlog or podcast, it can be overwhelming when it comes to selecting a microphone to use. But the whole purpose of this exercise is to move beyond Primo all-in-one capsules and try my hand at building more complicated (and better performing! Anti-shock mount, clip holder mount, arm stand, these can provide stable and adjustable support for microphone. It has the cosmetics but not the internals, and best to gut it and put in a large 34mm diaphragm with matching electronics. I’ve been impressed with both the build and audio quality that the microphone delivers, and really enjoy using it.This effectively turns the balanced output of the mic into two channel mono unbalanced output on the 3. Unless I’m recording birds that are drawn to shiny objects the windscreen will probably become a permanent fixture on this mic, just to keep me from going blind.