Joined in 2023 
82 
63 About this deal
I have no idea why they made the jumper thing on the side, but according to the chinglish datasheet I believe the ACT pin is just supposed to connect to cathode of an LED with a resistor. Make sure it opens properly and looks correct in any BIOS editing tools you are familiar with too, then you'll know it's OK. Note: Due to the characteristics of the CH341 chip, the ESMT SST class 25 chip can only be read and cannot be written.
If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. I attempted to use some leftover ethernet cable strands and between the insulation burning away and also breaking pin 29 from the IC, I got the idea from pupa to grind away the area by pin 29 to expose some metal to resolder the wire. as suggested by "RaceJay" worked really well to remove the BIOS password from the 25Q128 chip in my HP Folio 9480m.
La elección de programador desde el portal en línea o la aplicación móvil es compatible con nuestra página web. Los productos relacionados de ch341a programmer: Adaptador para adaptarse a la gran mayoría de los sistemas operativos del programador.
Con el adaptador de gran formato puedes utilizar este adaptador para poder usar un ordenador a la vez que se conecta a internet, o a otros dispositivos con puerto usb, como por ejemplo una memoria flash o una tarjeta gráfica. It didn't have the pinheaders on the sides of the ZIF socket which I wanted to know what they are for. For improved reliability and to avoid burning memory chips, I highly recommend using a level shifter.I ended up here because while attempting the NVMe via Flashback the board seemed to crash and the board would no longer post. I'm down to a bios issue and I stumbled upon the flashing process and have picked up the reader/programmer listed here and was able to get a read off the chip, however, when it comes to flashing the only file I have been able to find from Intel is '. Two modes of programming and serial port are optional, and online switching does not need to plug and unplug USB. I will place the link for the 16 pin chip clip at the bottom of this blog along with a link for the CH341a programmer. CH341-Windows-SPI-I2C-Driver+SDK-library” and “CH341-Windows-Serial-Driver+SDK-library” directories at https://github.
Quote from: camber on July 21, 2022, 12:26:29 pm I bought a black CH341A and made the recommended modification. I considered creating a voltage divider to step the voltage down but after a little Googling, I came across the CH341a with the 1. To learn more about the programming process, please read the manual of the programmer, which we already have provided in the above download table.
Other software options are available, but if there is an issue with the programming device, only NeoProgrammer can identify it. The status LED should light up, indicating that a successful connection has been established between the device and the computer. Recently I bought CH341A bios programmer for my 8 pin bios chip from asrock motherboard and I asked you here to clarify some procedures and software setup.
Great Deal 
New Comment