Some women squat while they put their cap in, while others lie down or stand with one foot up on a chair – use the position that’s easiest for you. That’s exactly why we have created this guide to chain link fence parts, which not only names each part but also provides information about what they are for, and how many you can expect to use on your fence job. Pictured Chain Link Fence Parts A woman can get pregnant if a man’s sperm reaches one of her eggs (ova). Contraception tries to stop this happening by keeping the egg and sperm apart or by stopping egg production. One method of contraception is the cap. A push-fit cap nut is positioned over the stud and pressed down either by hand or with a light tap of a rubber mallet. If the cap nut is threaded, they simply screw onto the bolt and tighten with a wrench or allen key. How to remove push cap nuts In real world use at least 12 women in 100 a year become pregnant because people forget to use the cap or don’t put it in properly (88% effective).

A cap can be easily removed by gently hooking your finger under its rim, loop or strap and pulling it downwards and out. You must leave your cap in place for at least 6 hours after the last time you had sex. Sperm can survive up to 6 hours in the vagina so if the barrier is removed too early, you increase your chances of pregnancy.Hog rings are small, pre bent metal rings that are used to clip the bottom of your chain link mesh to your bottom wire, using a special tool called a hog ring pliers. Tension bands look similar to brace bands, but they have a longer straight section with a hole drilled in it. They are used to catch and hold tension bars in place and are used on tension or terminal and gate posts. Line post tops are also called eye tops. They are a cap that fits over the top of your intermediate or line posts and has a built-in loop for the top rail to pass through. This helps to ensure that the fence line is secure and that the mesh can be hung from the top rail, because it’s supported at each line post.

So, an end post would have that number, but a corner post would have double, and a t-intersection would have three times.You normally need about one fence tie per foot of fence that you’re tying, but buy extra because they can be very hard to find if they fall into grass or garden beds! 7. Gate Frame Hinge

Sometimes, gate posts and terminal posts are the same sizes, particularly when you have a residential fence. However, if you have a very large gate, your gate posts might need to be larger than your fence posts, which also means you will have to have different size fittings. 11. Tension Bar To be effective in preventing pregnancy, the cap needs to be used in combination with spermicide, which is a chemical that kills sperm. This fitting combination allows you to connect top rails and horizontal braces to terminal and gate posts. Brace bands are sometimes also used to attach wire or barbed wire to posts and for other purposes on a chain link fence. 4. Tension BandThere are no serious health risks associated with using a contraceptive cap. Where you can get the cap?